How do I take off the back cover?
Please power off the mobile phone, place it on you hand with LCD facing downwards. Find the small gap on the lower of joint close, then push up the back cover from the gap to separate back cover from your mobile phone.
How do I enable the notification light for unprocessed notifications?
The notification light is mainly used for reminding about missed call and unread message. If you want the LED blinking when there are unread messages or missed calls, check Settings-Device-Display-Pulse notification light(Check √)
Note: Enabling the Pulse notification light will increase the power consumption of the phone.
What does the signal icons indicate?
When【Data】of mobile phone is enabled ,some signal icons will appear on the top of screen, they indicates the wireless network type of your smart phone, the detail are as follows:
E means EDGE network;
G means GPRS network;
H means you are using HSDPA network, it's a data transmission mode of WCDMA network.
How can I switch to airplane mode?
To get into 【Airplane mode】:
1. You can hold the power key until an option list appears, then choose【Airplane mode】.
2. You can press Menu--System settings--Airplane tap ON.
How can I set multiple phone numbers for a single contact?
Please make sure the contacts are saved in the memory of mobile phone or Google account. (You cannot save the contacts with multiple phone numbers in SIM card)
To set several groups of phone numbers for one person, please enter into home screen and press All applications-People, choose the contact that you want to add more data, then press Edit contacts-you can add new information to this contact, including phone, email, postal address, and etc.
Note: 1. All applications is a square icon on the straight lower of home screen, you can open the application selection list.
2. You can also add new Email address and other information by pressing on "Add XX" item of corresponding data.
Does the mobile phone support MAC operating system?
No, it doesn't.
How can I find the IMEI number of this device?
There are three ways to find the IMEI number of mobile phone.
1. Enter into home screen and press Menu--System settings--About phone--Status massage, then you can view the IMEI number of device and other basic information.
2. Take out battery cover and battery, then you can find a label which is printed with IMEI number on the back of device.
3. Enter into home screen and open the dialing pad, dial *#06# to open the manual function test mode, choose IMEI, then the device displays the IMEI number of device.
IMEI (International Mobile Equipment Identity) is used for identifying the number of GSM mobile phone.
How can I check the model name and number of this device?
To check the information of mobile phone:
Menu--System settings--About phone, the you can view the related information of mobile phone.
What is the normal working temperature of this device?
-10℃ to 50℃
Can I answer a call via headset?
Yes, you could.
Can I do three-way calling or multi-way calling?
Please refer to the following supposed situations to change the settings:
Suppose that, Party A, Party B and Party C need to call each other, A is the incoming call, B and C are waiting for the calling.
1. A gets through the call with B,
2. A make the call with C on the new dialing interface.
3. When A is calling C, B just needs to wait. And A can switch between B and C using the "switch" button on the bottom bar in the conversation interface.
4. After implementing step 3, A can combines all the talker together by using "combine" button on the bottom bar in the conversation interface.
Note: 1. During three-way (multi-way)calling, the first incoming call is the maker of this call, he/she needs to get through the call of each participants(three above) one by one 2. For three-way(multi-way)calling, the participants don't need to open the relevant businesses.
3. For three-way(multi-way) calling, maybe you need to pay extra fees, you need to make a confirmation with your service operator.
How can I quickly disable incoming call ringtone and enable vibration of mobile phone?
If you want to quickly disable the incoming call ringtone and open vibration mode, you can press volume down key to turn down the volume to the lowest until the mobile phone vibrates and the volume of ringtone is displayed as Zero. You can also press the power key until a pop up menu displayed, you can choose vibrate or silent mode there.
How can I dial and save the phone number which is transmitted by SMS?
To dial or save the phone number that is transmitted by SMS or email, please open the message which includes the phone number, then choose the phone number to save as contacts.
Note: All applications is a square icon on the straight lower of home screen.
How do I send SMS and Email to a group?
To send SMS or Email to contact groups, you must set the contacts which are saved in mobile phone or Gmail account as contacts group list.
1. Create and edit group. Enter into home screen and press All applications--People--Groups--New group or add the relevant contacts to existed group.
2. Select one group and open the list. Then choose option menu "Send group message" then compose the message.
Or you can enter into home screen and press All applications--Messaging--【New message】, click the icon of【Receiver】and choose 【Groups】, then choose the contacts that you need to send message, check √ in the box, and press【OK】, then edit and send the message subsequently.
Note: 1. All applications is a square icon on the straight lower of home screen.
2. The mobile phone should have removable Internet connection (Wi-Fi,GPRS/3G and so on) to transmit Email, also you may need to pay GPRS/3G fees.
How can I forward messages on mobile phone?
Please hold the messages to be forwarded for 2s until a menu appears, choose【Forward】 to enter into the option list of forwarding message, then select the recipient to forward.
How can I back up my data?
To back up your data, there are 2 ways: 1. You can back up your data via the third party PC software(Such as 91 assistant).
2. You can back up your data via Google account.
Can I change the input method?
You can download the input method that you want from Google【Play store】.
Note: You can refer to the question 【How do I use inputting method after installed it?】for more details.
How do I use the input method after installed it?
After installing input method, please tap Menu--System settings--Language& input, check √ for the installed input method.
How can I disable the virtual keypad ringtone and keypad vibration?
To disable virtual keypad ringtone:
Press Menu--System settings--Sound-Remove √ of 【Dial pad touch tones】【Touch Sounds】and 【Vibrate on touch】.
How do I restore device to factory settings?
You can solve many issues by restoring factory settings.
Press Menu--System settings--Backup & reset--Factory data reset. Then press "Reset phone" to start restoring factory setting.
The process will take about 3 minutes, the mobile phone will restart after restored successfully. If your mobile phone stops on a Logo image for a long time with no respond, please directly remove the battery, then install battery again to power on device.
Note: 1. The time to power on device will be a little longer after restored factory setting, so please wait with your patience.
2. Restore factory settings will erase the user data that is stored in mobile phone, therefore please back up the data before restoring factory settings.
Does the mobile phone support microSD card upgrade?
Yes, it does.
Can I set other locking methods besides pattern locking?
Yes, there are three methods of locking screen. To set screen lock, please access home screen and press Menu--System settings--Security--Screen lock. The available screen lock methods are as follows: 1. Long Press - Set long press screen to unlock.
2. Pattern - Set screen lock pattern according to the prompt of LCD.
3. PIN - Set one group of code which includes 4 digits at least.
4. Password - Set one group of password which includes letters and number.
Note: If you forgot screen locking, you may need to reset firmware, you can refer to the question of (How do I restore factory settings)
How can I set the password as invisible?
To set the password as invisible:
Press Menu--System settings--Security--Password, then remove √ of【Make passwords visible】.