- Internet Devices
- About Us
Verizon Jetpack™ 890L890L
- 4G LTE Data Speed
- OLED display with interactive keypad
Other Key Features
- Mobile Hot Spot
- Support for up to 10 Wi-Fi-enabled devices
Hotspot Design Type Mobile Broadband Form Factor Mobile Hotspot Height 3.5” Width 3.5” Depth 0.71” Weight 4.79 oz Color Black Systems Supported Compatibility With All Major Operating Systems Battery Capacity 1700 mA Use Time 4 Hours Standby Time* 48 Hours
*Actual times vary because some features & applications may use more power
Connectivity Wi-Fi 802.11 b/g/n Security Encryption WEP/WPA/WPA2
Check out the latest support materials here for your device.
Download user manuals, read FAQs, and upgrade your device's software.Expand All |Collapse All
How to power on the 890LSlide the Power Switcher toON. The Verizon banner will be displayed, while the device is booting up. “Checking SIM” will be displayed. The SSID and Password will be displayed. The Connection Status will be displayed. The SSID and Password will be re-displayed and remain there until the “OK” button is selected. The device displays the home screen.
How to power off the 890LSlide the Power Switch to the “OFF” position. The device displays “Powering off” until the shutdown sequence is complete.Expand All |Collapse All
The screen turns off after my device has been charging for a whileWhen there is no user connected to the 890L for a period of time or any key presses, the device will enter sleep mode and the screen will turn off. A Short press of theOKkey will wake up the device.
Why does the device UI sometimes display Connecting status for a long time after I clicked “Check New”?Due to varying Network conditions that may result in difficulty connecting to the Network/OTADM server, we designed a 5 minute protection mechanism. The device UI will display “Connecting”. If the device cannot connect with Network/Server after 5 minutes, the device UI will display “SERVER UNAVAILABLE”. Selecting OK will return to “Check New” interface.
When I clicked “Check New” on the device, how can I cancel the subsequent operations?When the device is in “Connecting” state after clicking “Check New”, you can move the power key to “off” and the device will power off immediately to cancel the operation.Expand All |Collapse All
How to charge your deviceYou can charge your device by using a micro USB cable or wall charger. Insert the wall charger into a working electrical outlet OR Insert USB cable into powered USB port on laptop or PC AND Properly insert the micro USB connection into the 890L.Expand All |Collapse All
How to establish a connection between my Device and the ClientPower on your device. It will take 1~2 minutes to initialize. Use your normal Wi-Fi application on your computer to establish a connection to your device. Look for the network (SSID) named “Verizon-890L-xxxx” and “xxxx” varies from device to device.This can be found on the back of the device or from the UI as per #5 Click Connect and enter the default password printed on the back of your device. The password can also be found in the UI as per #6 Wait a moment, the connection between your device and the client will be established successfully.
How to access the InternetSwitch on the device. Establish a connection between your device and the client as per #11 After successfully establishing the connection, access the Internet in theAuto ConnectorManual Connectmode as set in the Web UI. The default mode isAuto Connect.Expand All |Collapse All
Software & Apps
Supported browsers for logging into the WebUIIE (7.0 or later) Firefox (3.0 or later) Opera (10.0 or later) Safari (4.0 or later) Chrome (5.0 or later)Expand All |Collapse All
How to change the Web UI PasswordLog into the Web UI as per Q15, selectBasic Setup→Password, ChangePassword, clickApplyto confirm after finished changing the password. A message will popup indicating the password was successfully changed.
Default SSID, Password and Encryption Mode for the 890LTheDefault SSID isVerizon-890L-XXXX(the last 4 digits of MAC address),initial encryption mode of Wi-Fi isWPA2-PSK. User can get initial password from the device display while powering on or in SSID information menu.
How to change the SSIDLog inWeb UI.Go toWi-Fi Settings→Basic. Go to the SSID field and enter the information you want. ClickApply. The device will restart. Now you will see the new SSID being transmitted using PC wireless card manager.You must select the new SSID to connect to the 890L
ManualsVerizon Jetpack(TM) 890L User Guide (English - PDF - 3.31MB)
Software UpdatesVerizon Jetpack(TM) 890L Driver for Mac (ZIP - 433KB)
Verizon Jetpack(TM) 890L Driver for Windows (ZIP - 417KB)
Contact SupportIf you have questions about how to use ZTE mobile devices or your device needs repair services, please contact our services hotline or email for more information.Service Hotline: 877-817-1759
Hotline Hours: 9:00 am - 9:00 pm (CST)Live ChatEmail ZTE